Please Login >
English| 简体中文

  • Complex
  • Title
  • Keyword
  • Abstract
  • Scholars
  • Journal
  • ISSN
  • Conference
搜索

Advanced Search

Author：

Cao, Ming (Cao, Ming.) | Zhang, Dongyun (Zhang, Dongyun.) (Scholars：张冬云) | Gao, Yang (Gao, Yang.) | Chen, Runping (Chen, Runping.) | Huang, Guoliang (Huang, Guoliang.) | Feng, Zhe (Feng, Zhe.) | Poprawe, Reinhart (Poprawe, Reinhart.) | Schleifenbaum, Johannes Henrich (Schleifenbaum, Johannes Henrich.) | Ziegler, Stephan (Ziegler, Stephan.)

Indexed by：

EI Scopus SCIE

Abstract：

Microstructure,　mechanical　performances　at　elevated　temperature　(650　°C)　and　their　correlation　of　Inconel　718　manufactured　by　Selective　Laser　Melting　(SLM)　were　investigated　in　this　paper.　Four　kinds　of　heat　treatment　schemes　including　homogenization,　solution　treatment　and　conventional　aging　process　were　carried　out　to　regulate　the　microstructure　in　order　to　obtain　the　optimum　comprehensive　mechanical　performances　at　high　temperature.　The　dimension　and　morphology　of　grains,　subgrains,　different　precipitates　including　δ　phase,　strengthening　phase,　carbides　and　nitrides　were　investigated.　In　addition,　their　evolution　mechanism　was　also　analyzed　in　detail.　Furthermore,　for　figuring　out　the　effects　of　microstructures　on　the　mechanical　performance,　creep　rupture　test　and　tensile　test　were　carried　out　to　compare　the　performance　differences　of　heat-treated　samples.　The　results　demonstrated　that　the　heat-treated　samples　show　the　better　creep　rupture　performance　and　higher　tensile　strength　at　elevated　temperature　than　that　of　the　wrought.　In　addition,　the　sample　under　homogenization　heat　treatment　in　1080　°C,　solution　treatment　in　980　°C　and　conventional　aging　treatment　shows　the　optimum　mechanical　properties　at　650　°C.　©　2020　Elsevier　B.V.

Keyword：

Morphology Creep Carbides Tensile strength Microstructure Tensile testing Selective laser melting Heat treatment

Author Community：

  • [ 1 ] [Cao, Ming]Institute of Laser Engineering, Faculty of Materials and Manufacturing, Beijing University of Technology, Pingleyuan No. 100, Chaoyang Dist, Beijing; 100124, China
  • [ 2 ] [Cao, Ming]Beijing Engineering Research Center of 3D Printing for Digital Medical Health, Beijing, China
  • [ 3 ] [Zhang, Dongyun]Institute of Laser Engineering, Faculty of Materials and Manufacturing, Beijing University of Technology, Pingleyuan No. 100, Chaoyang Dist, Beijing; 100124, China
  • [ 4 ] [Zhang, Dongyun]Beijing Engineering Research Center of 3D Printing for Digital Medical Health, Beijing, China
  • [ 5 ] [Gao, Yang]Institute of Laser Engineering, Faculty of Materials and Manufacturing, Beijing University of Technology, Pingleyuan No. 100, Chaoyang Dist, Beijing; 100124, China
  • [ 6 ] [Gao, Yang]Beijing Engineering Research Center of 3D Printing for Digital Medical Health, Beijing, China
  • [ 7 ] [Chen, Runping]Institute of Laser Engineering, Faculty of Materials and Manufacturing, Beijing University of Technology, Pingleyuan No. 100, Chaoyang Dist, Beijing; 100124, China
  • [ 8 ] [Chen, Runping]Beijing Engineering Research Center of 3D Printing for Digital Medical Health, Beijing, China
  • [ 9 ] [Huang, Guoliang]Institute of Laser Engineering, Faculty of Materials and Manufacturing, Beijing University of Technology, Pingleyuan No. 100, Chaoyang Dist, Beijing; 100124, China
  • [ 10 ] [Huang, Guoliang]Beijing Engineering Research Center of 3D Printing for Digital Medical Health, Beijing, China
  • [ 11 ] [Feng, Zhe]Institute of Laser Engineering, Faculty of Materials and Manufacturing, Beijing University of Technology, Pingleyuan No. 100, Chaoyang Dist, Beijing; 100124, China
  • [ 12 ] [Feng, Zhe]Beijing Engineering Research Center of 3D Printing for Digital Medical Health, Beijing, China
  • [ 13 ] [Poprawe, Reinhart]Fraunhofer Institute for Laser Technology ILT, Aachen, Germany
  • [ 14 ] [Schleifenbaum, Johannes Henrich]Fraunhofer Institute for Laser Technology ILT, Aachen, Germany
  • [ 15 ] [Schleifenbaum, Johannes Henrich]RWTH Aachen University – Digital Additive Production (DAP), Aachen, Germany
  • [ 16 ] [Ziegler, Stephan]RWTH Aachen University – Digital Additive Production (DAP), Aachen, Germany

Reprint Author's Address：

  • 张冬云

    [zhang, dongyun]beijing engineering research center of 3d printing for digital medical health, beijing, china;;[zhang, dongyun]institute of laser engineering, faculty of materials and manufacturing, beijing university of technology, pingleyuan no. 100, chaoyang dist, beijing; 100124, china

Email：


zhangdy@bjut.edu.cn
Show more details

Related Keywords：

Related Article：

Source ：

Materials Science and Engineering A

ISSN： 0921-5093

Year： 2021

Volume： 801

6 . 4 0 0

JCR@2022

ESI Discipline： MATERIALS SCIENCE;

ESI HC Threshold：116

JCR Journal Grade：1

Cited Count：

WoS CC Cited Count： 0

SCOPUS Cited Count： 75

ESI Highly Cited Papers on the List： 0 Unfold All

WanFang Cited Count：

Chinese Cited Count：

30 Days PV： 5

Affiliated Colleges：

材料科学与工程学院 本学院/部未明确归属的数据

Get Fulltext

DOI Library Discovery Baidu Scholar Search Engineering Village
Online/Total：376/10629488
Address：BJUT Library(100 Pingleyuan,Chaoyang District,Beijing 100124, China Post Code：100124) Contact Us：010-67392185
Copyright：BJUT Library Technical Support：Beijing Aegean Software Co., Ltd.