Different　types　of　WC/NiCrBSi　metal　matrix　composite　coatings　were　deposited　by　laser　cladding.　The　wear　resistance　of　these　composite　coatings　was　tested　with　a　ring-on-disc　(MMG-10)　apparatus.　The　morphologies　of　the　worn　surfaces　were　observed　using　a　scanning　electron　microscopy　(SEM)　equipped　with　an　energy　dispersive　spectroscopy　(EDS)　for　elemental　composition.　The　results　showed　that　the　wear　resistance　of　the　laser　clad　WC/Ni-based　composite　coatings　increased　significantly　with　increasing　WC　mass　fraction.　It　had　also　been　suggested　that　the　composite　coating　containing　60　wt%　agglomerate　WC　had　superior　wear　resistance　property.　The　wear　mechanism　was　then　discussed　on　the　basis　of　microscopic　observations　of　the　worn　surfaces.