Query：
学者姓名：刘中良
Refining：
Year
Type
Indexed by
Source
Complex
Former Name
Co-Author
Language
Clean All
Abstract ：
Non-equilibrium phase transition flow is prevalent and of great irreversible loss during the transonic mixing process of steam ejector, but its complex evolution law is thus far unclear. In this study, a considerate two-phase ejector model was developed to investigate the non-equilibrium phase transition flow characteristics by means of CFD numerical simulation, including how, where and to what extent the phase transition occurs. Additionally, the quantitative analysis of the operating parameters influences on the phase transition flow and ejector's entrainment performance were conducted. Results showed that the evolution law of condensate is highly consistent with the pressure fluctuation of shock wave. Non-equilibrium condensation is to be intensified as the primary fluid pressure increases, and the entrainment performance thus worsens. For raising the secondary fluid pressure, the case is opposite, the entrainment ratio w increases by 17.8 %. Superheating the working fluids can restrain the droplet development, and more small-sized droplets therefore emerge, but w only raises by a maximum of 3.53 %. However, it is hard to restrain the condensate generation in primary jet flow by superheating the secondary fluid, both suction pressure and w decrease. This study provides meaningful guidance for reducing the irreversibility loss from non-equilibrium phase transition flow.
Keyword ：
Performance improvement Performance improvement Operating parameters analysis Operating parameters analysis Non-equilibrium phase transition flow Non-equilibrium phase transition flow Steam ejector Steam ejector difference difference Shock wave Shock wave
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Tang, Yongzhi , Zhong, Zilong , Liu, Zhongliang et al. Study on evolution law of non-equilibrium phase transition flow and performance improvement of steam ejector for MED-TVC desalination system [J]. | ENERGY , 2025 , 316 . |
| MLA | Tang, Yongzhi et al. "Study on evolution law of non-equilibrium phase transition flow and performance improvement of steam ejector for MED-TVC desalination system" . | ENERGY 316 (2025) . |
| APA | Tang, Yongzhi , Zhong, Zilong , Liu, Zhongliang , Lu, Lin , Huang, Yichen , Wen, Chuang . Study on evolution law of non-equilibrium phase transition flow and performance improvement of steam ejector for MED-TVC desalination system . | ENERGY , 2025 , 316 . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
The effects of cold surface temperature, wet air state (temperature and humidity) and original drop size on frost dendrites growth of two neighboring separate frozen water drops of same size under natural convection conditions were investigated by quantitative measurement. It was determined that for different cold plate surface temperature conditions, i.e., the ordinary-low temperature and the cryogenic temperature range, the frost formation mechanism is different. Under the conditions that the air temperature is not too high and absolute humidity is not too excessive, the influence of frozen water drop size on the longest dendrite of frost crystals becomes more and more obvious with the decrease in cold plate temperature. The changes in air temperature and relative humidity both change air absolute humidity, so they have similar effects on the growth of dendrites. However, the effect of wet air state on the growth of frost dendrites is not monotonous, which needs to be considered comprehensively in combination with heat and mass transfer and the existence of heavy phase layer. The thickness of 'the initial continuous frost layer' was measured and it was disclosed that the initial frost layer thickness is 1.7-3.0 times that of the height of the frozen water drop diameter. This value may be possibly used as initial frost layer thickness in heat and mass transfer-based frost layer growth prediction models, at least for ordinary-low temperature conditions.
Keyword ：
initial frost layer thickness initial frost layer thickness dendrite growth dendrite growth frost crystal frost crystal cryogenic cold surface cryogenic cold surface
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Yu, Fengjiao , Liu, Zhongliang , Li, Yanxia et al. Experimental Study of Frost Crystals Dendrite Growth on Two Neighboring Separate Frozen Water Drops on a Cryogenic Cold Surface under Natural Convection Conditions [J]. | ENERGIES , 2023 , 16 (4) . |
| MLA | Yu, Fengjiao et al. "Experimental Study of Frost Crystals Dendrite Growth on Two Neighboring Separate Frozen Water Drops on a Cryogenic Cold Surface under Natural Convection Conditions" . | ENERGIES 16 . 4 (2023) . |
| APA | Yu, Fengjiao , Liu, Zhongliang , Li, Yanxia , Chen, Yanling , Li, Yi . Experimental Study of Frost Crystals Dendrite Growth on Two Neighboring Separate Frozen Water Drops on a Cryogenic Cold Surface under Natural Convection Conditions . | ENERGIES , 2023 , 16 (4) . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
Quantitative measurements were carried out of the dendrite frost crystal growth under natural convection conditions on a frozen water drop sitting on a cold surface whose temperature is as low as-190 degrees C to study the effects of cold surface temperature, wet air state and original water drop size. In order to classify the influences of different cold surface temperature regions, the frost crystal dendrite growth of both ordinary-low and cryogenic cold surface temperatures were investigated. It was found that the cold plate surface temperature has a direct influence on frost formation mechanism. Decreasing the cold surface temperature for ordinary-low cold surface temperatures will enhance and for cryogenic cold surface temperatures will suppress the frost crystal dendritic growth of the frozen water drop. The measurements disclosed that the length of the longest frost crystal dendrite grows almost linearly with time, esp. in the early stage. The effects of the water drop sizes on the longest frost crystal dendrite growth become more and more obvious as the cold surface temperature decreases. The influence of air relative humidity on the frost crystal dendrite growth is something similar to that of air temperature under given conditions, since their change both changes the absolute air humidity. A very peculiar phenomenon, i.e. the influence of wet air state on frost crystal dendrite growth is not monotonous, was observed. These findings are important for understanding and studying the frost formation and growth, especially the initial frost formation period, on low temperature surfaces.
Keyword ：
Cryogenic cold surface Cryogenic cold surface Natural convection Natural convection Dendrite growth Dendrite growth Frost crystal Frost crystal
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Yu, Fengjiao , Liu, Zhongliang , Li, Yanxia et al. Experimental study of frost crystal dendrite growth on a cryogenic cold surface under natural convection conditions [J]. | INTERNATIONAL JOURNAL OF REFRIGERATION , 2022 , 144 : 305-315 . |
| MLA | Yu, Fengjiao et al. "Experimental study of frost crystal dendrite growth on a cryogenic cold surface under natural convection conditions" . | INTERNATIONAL JOURNAL OF REFRIGERATION 144 (2022) : 305-315 . |
| APA | Yu, Fengjiao , Liu, Zhongliang , Li, Yanxia , Chen, Yanling , Li, Yi . Experimental study of frost crystal dendrite growth on a cryogenic cold surface under natural convection conditions . | INTERNATIONAL JOURNAL OF REFRIGERATION , 2022 , 144 , 305-315 . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
In this study, a single-piston free-piston expander-linear generator test system for the power-electricity conversion is presented using compressed air as the working fluid. This study investigated the effect of intake time and intake pressure on the performance of the test system. Examples include the following: in-cylinder pressure, bias displacement, one-way time, indicated work, output electric energy, and work electricity conversion efficiency in a single cycle using the position-time control method with the intake position of 21and 45 mm. Result shows that: in the operational process of the test system, all values obtained when the piston runs from top dead center to bottom dead center are all different compared with those obtained when the piston runs from bottom dead center to top dead center. When the test system operates with low intake pressure and short intake time, the working chamber without a piston rod will over-expand. With the increase of intake time or intake pressure, the bias displacement, indicated work, and one-way output electric energy show an increasing trend. Moreover, the one-way time shows a decreasing trend and eventually tends to a fixed value, and the one-way work-electricity conversion efficiency initially increases and then decreases. (c) 2021 Elsevier Ltd. All rights reserved.
Keyword ：
Work-electricity conversion efficiency Work-electricity conversion efficiency Indicated work Indicated work Single-piston free-piston expander-linear generator Single-piston free-piston expander-linear generator Bias displacement Bias displacement Output electric energy Output electric energy One-way time One-way time
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Wu, Zhong , Zhang, Hongguang , Liu, Zhongliang et al. Experimental study on the performance of single-piston free-piston expander-linear generator [J]. | ENERGY , 2021 , 221 . |
| MLA | Wu, Zhong et al. "Experimental study on the performance of single-piston free-piston expander-linear generator" . | ENERGY 221 (2021) . |
| APA | Wu, Zhong , Zhang, Hongguang , Liu, Zhongliang , Hou, Xiaochen , Li, Jian , Yang, Fubin et al. Experimental study on the performance of single-piston free-piston expander-linear generator . | ENERGY , 2021 , 221 . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
In this study, a visualizable experimental platform of steam ejector oriented towards MED-TVC desali-nation system is constructed, and the evolution laws of two-phase choking flow and ejector's entrain-ment performance under various operating parameters are obtained. Further, a matching double-choking theory with consideration of the condensing flow is developed to explain the inherent reason behind these evolution laws. Key results revealed that the formed two-phase choking flows have great effects on ejector's entrainment performance. The primary jet flow choking area linearly increases as the primary steam pressure raises, and the entrainment choking area experiences a small reduction, while the extended flow area marginally increases. Accordingly, the entrainment ratio significantly decreases, while the choking cross-section is slightly shifted upstream. In addition, the primary jet flow choking area considerably decreases with increasing entrainment pressure, but the entrainment choking area is nearly unchanged and the extended flow area increases by more than 8 times. As a result, the entrainment ratio remarkably increases, the choking cross-section migration distances are much larger than that in the case of primary steam pressure varies. A meaningful guide evolves from fact that priority should be given to restrain the condensing flow for achieving a higher energy efficiency of ejector. (c) 2021 Elsevier Ltd. All rights reserved.
Keyword ：
Steam ejector Steam ejector Double-choking theory Double-choking theory Evolution laws Evolution laws Operating parameters Operating parameters Two-phase choking flow Two-phase choking flow Entrainment performance Entrainment performance
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Tang, Yongzhi , Yuan, Jiali , Liu, Zhongliang et al. Study on evolution laws of two-phase choking flow and entrainment performance of steam ejector oriented towards MED-TVC desalination system [J]. | ENERGY , 2021 , 242 . |
| MLA | Tang, Yongzhi et al. "Study on evolution laws of two-phase choking flow and entrainment performance of steam ejector oriented towards MED-TVC desalination system" . | ENERGY 242 (2021) . |
| APA | Tang, Yongzhi , Yuan, Jiali , Liu, Zhongliang , Feng, Qing , Gong, Xiaolong , Lu, Lin et al. Study on evolution laws of two-phase choking flow and entrainment performance of steam ejector oriented towards MED-TVC desalination system . | ENERGY , 2021 , 242 . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
There is not a specific technical proposal to be able to achieve a clear presentation of the complex mixing process between the primary and entrained flows within the steam ejector. In this study, a novel ejector model with species transport is proposed that can clearly elucidate how, when, where and to what extent the two streams mix. Systematic quantitative analysis toward the mixing of two streams is performed from the perspectives of mass, momentum and energy transfer. Further, the similarities and differences of the mixing process among three analytical perspectives are clarified. Key results revealed that the mixing mainly occurs at the nearby of the local mixing layer, and there are still some distances from the homogenous mixing state after the mixing chamber process, only up to 80.6% the mixing uniformity phi obtains. Additionally, the mixing layer follows a similar growth trajectory, and phi increases as mixing continues regardless of an analytical perspective. However, a much faster mixing is observed from the mass transfer perspective. Specifically, phi(M) (80.6%) is significantly larger than phi(V) (60.7%) and phi(E) (59.6%) at the mixing chamber outlet. It can be concluded that the essential mass mixing laws of the two streams are not necessarily achieving a complete replication whether from the perspective of momentum or energy transfer. These key findings provide a more in-depth and comprehensive understanding of the mixing process inside the ejector.
Keyword ：
Mass, momentum and energy transfers Mass, momentum and energy transfers Steam ejector Steam ejector Multi-perspective comparisons Multi-perspective comparisons Mixing process Mixing process Species transport Species transport
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Tang, Yongzhi , Liu, Zhongliang , Li, Yanxia et al. Mixing process of two streams within a steam ejector from the perspectives of mass, momentum and energy transfer [J]. | APPLIED THERMAL ENGINEERING , 2021 , 185 . |
| MLA | Tang, Yongzhi et al. "Mixing process of two streams within a steam ejector from the perspectives of mass, momentum and energy transfer" . | APPLIED THERMAL ENGINEERING 185 (2021) . |
| APA | Tang, Yongzhi , Liu, Zhongliang , Li, Yanxia , Zhao, Fei , Fan, Pengyan , Chua, Kian Jon . Mixing process of two streams within a steam ejector from the perspectives of mass, momentum and energy transfer . | APPLIED THERMAL ENGINEERING , 2021 , 185 . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
Flow and heat transfer characteristics of oil-based drilling cuttings in a screw-driving spiral heat exchanger were numerically simulated. The influence of spiral tube rotation speed, Reynolds number of oil-based drilling cuttings, cross-sectional shape on flow and heat transfer characteristics were studied. The results show that with rotation speed increases, the heat transfer coefficient and outlet temperature of oil-based drilling cuttings all increase. In addition, when Reynolds number is less than 250, Nusselt number increases rapidly with the increase of Reynolds number, and Reynolds number has little influence on Nusselt number when it is more than 250. Besides, Nusselt number increases with the increase of curvature ratio di=D. In order to facilitate engineering design, a correlation for heat transfer of oil-based drilling cuttings flowing in the shell side of the heat exchanger is obtained. © 2021, Science Press. All right reserved.
Keyword ：
Infill drilling Infill drilling Reynolds number Reynolds number Heat exchangers Heat exchangers Screws Screws Nusselt number Nusselt number
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Zhao, Fei , Li, Yan-Xia , Liu, Zhong-Liang et al. Flow and Heat Transfer Characteristics of Oil-based Drilling Cuttings in Screw-driving Spiral Heat Exchanger [J]. | Journal of Engineering Thermophysics , 2021 , 42 (4) : 959-965 . |
| MLA | Zhao, Fei et al. "Flow and Heat Transfer Characteristics of Oil-based Drilling Cuttings in Screw-driving Spiral Heat Exchanger" . | Journal of Engineering Thermophysics 42 . 4 (2021) : 959-965 . |
| APA | Zhao, Fei , Li, Yan-Xia , Liu, Zhong-Liang , Mi, Fu-Lin , Gao, Li-Qing , Li, Qing-Fang et al. Flow and Heat Transfer Characteristics of Oil-based Drilling Cuttings in Screw-driving Spiral Heat Exchanger . | Journal of Engineering Thermophysics , 2021 , 42 (4) , 959-965 . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
利用化学及电化学方法将非贵金属催化剂石墨烯(rGO)和纳米MnO2依次负载到三维多孔不锈钢纤维毡(Stainless steel fiber felt,SSFF)集电体上制备微生物燃料电池(Microbial fuel cell,MFC)空气阴极.在增大空气阴极活化面积的同时有效减小接触阻抗.通过物理和电化学方式测试表征其形貌、氧还原特性.在MFC中的运行结果表明,负载5 mL还原性氧化石墨烯再浸渍生长MnO2的不锈钢纤维毡(rGO@MnO2-SSFF)空气阴极的最大功率密度(524.34 mW/m2)是不锈钢纤维毡阴极(58.21 mW/m2)的9倍.经过复合催化剂rGO@MnO2修饰之后的不锈钢纤维毡空气阴极可以应用于MFC并大幅改良SSFF空气阴极的氧还原催化性能.
Keyword ：
不锈钢纤维毡 不锈钢纤维毡 纳米二氧化锰 纳米二氧化锰 氧化石墨烯 氧化石墨烯 空气阴极 空气阴极 微生物燃料电池 微生物燃料电池
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | 陈稳稳 , 牛恒 , 刘中良 . 一体式无粘结剂rGO@MnO2不锈钢纤维毡空气阴极的制备 [J]. | 现代化工 , 2021 , 41 (3) : 88-91 . |
| MLA | 陈稳稳 et al. "一体式无粘结剂rGO@MnO2不锈钢纤维毡空气阴极的制备" . | 现代化工 41 . 3 (2021) : 88-91 . |
| APA | 陈稳稳 , 牛恒 , 刘中良 . 一体式无粘结剂rGO@MnO2不锈钢纤维毡空气阴极的制备 . | 现代化工 , 2021 , 41 (3) , 88-91 . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
一体式无粘结剂rGO@MnO_(2)不锈钢纤维毡空气阴极的制备
Keyword ：
微生物燃料电池 微生物燃料电池 氧化石墨烯 氧化石墨烯 纳米二氧化锰 纳米二氧化锰 空气阴极 空气阴极 不锈钢纤维毡 不锈钢纤维毡
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | 陈稳稳 , 牛恒 , 刘中良 et al. 一体式无粘结剂rGO@MnO_(2)不锈钢纤维毡空气阴极的制备 [J]. | 陈稳稳 , 2021 , 41 (3) : 88-91 . |
| MLA | 陈稳稳 et al. "一体式无粘结剂rGO@MnO_(2)不锈钢纤维毡空气阴极的制备" . | 陈稳稳 41 . 3 (2021) : 88-91 . |
| APA | 陈稳稳 , 牛恒 , 刘中良 , 现代化工 . 一体式无粘结剂rGO@MnO_(2)不锈钢纤维毡空气阴极的制备 . | 陈稳稳 , 2021 , 41 (3) , 88-91 . |
| Export to | NoteExpress RIS BibTex |
Abstract ：
水泥熟料生产企业CO2直接排放核算模型的建立
Keyword ：
CO2排放量核算 CO2排放量核算 实际产能 实际产能 生产时长 生产时长 CO2排放清单 CO2排放清单 水泥熟料生产企业 水泥熟料生产企业 水泥熟料烧成煤耗 水泥熟料烧成煤耗
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | 杨楠 , 李艳霞 , 赵盟 et al. 水泥熟料生产企业CO2直接排放核算模型的建立 [J]. | 杨楠 , 2021 , 17 (1) : 79-87 . |
| MLA | 杨楠 et al. "水泥熟料生产企业CO2直接排放核算模型的建立" . | 杨楠 17 . 1 (2021) : 79-87 . |
| APA | 杨楠 , 李艳霞 , 赵盟 , 吕晨 , 刘中良 , 陈莎 et al. 水泥熟料生产企业CO2直接排放核算模型的建立 . | 杨楠 , 2021 , 17 (1) , 79-87 . |
| Export to | NoteExpress RIS BibTex |
Export
| Results： |
Selected to |
| Format： |
