A　Fe-based　cored　wire　was　used　to　deposit　coatings　containing　Fe-based　amorphous　phase　on　the　Q235　steel　substrate　by　arc　spraying.　The　microstructure　of　the　coating　was　investigated　by　optical　microscopy.　Scanning　electron　microscopy　and　X-ray　diffraction　analysis　were　used　to　study　the　phase　composition　in　the　coating.　The　coating　contains　Fe-based　amorphous　phase,　the　fraction　of　amorphous　phase　was　calculated　by　fitting　Pseudo-Voigt　function　to　diffraction　peak　of　XRD.　The　coating　has　homogenous　laminated　microstructure　and　contains　only　a　little　micro-pores,　and　it　has　high　hardness　and　exhibited　good　wear　resistance,　the　microhardness　values　were　between　HV900-1050,　the　relative　wear　resistance　is　12.2　times　more　than　Q235　steel　under　the　same　test　condition.　The　main　wear　mechanism　is　brittle　flaking-off.